Keeping Your Hands Clean While Working As A Mechanic

When you work as a mechanic on engines and vehicles all day, there is a high chance that your hands will get dirty. Your hands can get covered in many different materials, such as oil, grease, dirt, and other fluids, and some of them can be tricky to get off. You can also find that some of the soaps and detergents you can use are effective, but they harm your skin, drying it out. If your hands often get filthy at work and you struggle to keep them clean, below are some tips and advice that you may find helpful to make your hands spotless.

Choose The Correct Cleaning Products

You may need to research to find the correct heavy-duty hand cleaner that is effective and does not damage or dry out your skin. You may need to get more than one product as you have various types of dirt and grease on your hands, as some products work better than others. It may also require some experimentation, and you may need to try a few different types of hand cleaners until you find the one that is most effective for you. You will also need to ensure an effective cleaning regime for your hands to help keep them clean and ensure you get under the fingernails.

Cleaning Your Hands Thoroughly

Many people will run the water while cleaning their hands, but this can be a waste, so you will want to fill the sink with a small amount of warm water. You will only need enough water to submerge your hands one at a time, and you will want the water as hot as you can tolerate, which will help cut through the grease and dirt. Get your hands wet and then apply your chosen hand cleaner and use your hands to work it into the skin, rubbing your hands together. You will also want to get a nail brush and ensure you clean underneath your nails, removing any trapped oil or dirt. Once you have done this and your hands are clean, you will need to rinse them off before drying them thoroughly with a soft towel.

Do Not Forget The Moisturiser

Using lots of hand cleaner and the liquids that will cover your hands as a mechanic can damage your skin and cause it to dry out. You will want to ensure that you use a suitable hand moisturiser to keep your skin soft and supple and stop it from drying out. It is easy to get suitable moisturisers, and if you look where you bought the hand cleaner, they will usually have something appropriate you can get at the same time. Having dry or cracked skin can get painful, which is not something you want when working with your hands.

Prevention is always better than the cure, so wearing non-latex gloves while you work can save your hands from getting much dirtier. Even when wearing gloves, you will still need to clean and moisturise your hands to keep your skin soft and supple.